Inductive sensor for harsh environmental conditions and temperatures down to 120°C Order number: 4617035
|
Rated operating distance Sn | 10 mm |
Mounting condition | flush |
Assured sensing range | ≤ (0,81 x Sn) mm |
Correction factors | St37 = 1, V2A ~ 0.7, Ms ~ 0.4, Al ~ 0.3 |
Repeatability | ≤ 2 % |
Temperature drift | ≤ ± 10 % |
≤ ± 20 %, ≥ +70 °C | |
Hysteresis | 3.0 % of full scale … 15.0 % of full scale |
Ambient temperature | -25 °C …+ 120 °C |
Operating voltage | 10.0 VDC … 30.0 VDC |
Residual ripple | ≤ 10 % Uss |
DC rated operational current | ≤ 200 mA |
Rated operational current | see derating curve |
No-load current I0 | ≤ 15 mA |
Residual current | ≤ 0.1 mA |
Rated insulation voltage | ≤ 0.5 kV |
Short-circuit protection | yes / cyclic |
Voltage drop at Ie | ≤ 1.8 V |
Wire breakage / Reverse polarity protection | yes / complete |
Output function | 4-wire , Two-way contact , PNP |
Switching frequency | ≤ 0.1 kHz |
Warning | |
Housing | threaded barrel , M30 x 1.5 |
Dimensions | 100.0 mm |
Housing material | metal , V4A (1.4571) |
Material active face | Plastic , PTFE |
End cap | plastic , Teflon |
Admissible pressure on front cap | ≤ 10 bar |
Tightening torque of housing nut | 75 Nm |
Electrical connection | cables |
Cable quality | Ø 3.7 , PTFE , Teflon FEP , 2.0 m |
Cable cross section: | 4 x 0.25 mm2 |
Vibration resistance | 55 Hz (1 mm) |
Shock resistance | 30 g (11 ms) |
Protection class | IP68 / IP69K |
Display switch state | LED yellow |
|