" />
23立方壓縮空氣吸附式干燥機微加熱吸干機氣源凈化設備除濕設備
吸干機是壓縮空氣吸附式干燥機的簡稱,是一種與螺桿空壓機配套,配套空氣過精密濾器,用于處理壓縮空氣氣源不可缺少的設備!分為無熱吸干機和有熱吸干機兩大類。
16
工作原理Working Elements
微熱再生壓縮空氣干燥機是我公司設計和研制,達到國內先進水平的節能型產品。本系列產品集有熱再生與無熱再生的優點,對再生氣采用微加熱的形式,從而減少再生氣耗量,達到節能的目的。它避免了無熱再生干燥機切換時間短,再生空氣損耗量大的缺點,同時也避免了有熱再生空氣干燥機電能損耗大的缺點。該干燥機具有切換時間合理,再生氣耗量少,是目前凈化行業最經濟的節能型吸附式干燥機,被廣泛應用于冶金、電力、電子、食品、化工、石油、醫藥、輕紡、煙草、儀表、自動控制等行業。
Externally heated purge desiccant air dryeris a new economic product developed by our company.This series product integrating advantages of heat-exists purge and heatless purge,externally heating the purge type air, reduce it’s consumption.It efficiently avoids the disadvantages of short switching time and consuming most of the purge air of the desiccant air dryer and wasting electricity of heat-exists air dryer.This product has got rationally switch time,little purge air consumption,also being the most economical desiccant dryer in this line and widely used in metallurgy,electrical.electron,foodstuff,chemical industry, petroleum, medicine, light industry, cigarette,apparatus,auto industry and so on.
進氣溫度:Inlet temperature: 0~38℃
進氣含油量:Inlet oil content:≤0.01mg/m3
工作壓力:Working pressure:0.6~1.0MPa
壓力露點:Designed dew point: -20~-70℃
再生氣量:Purge air: ≤4%~6%
干燥劑:Desiccant:activated alumina and molecular sieve (活性氧化鋁和分子篩)
再生方式:Purge mode: externally heated purge 微熱再生
工作方式:Working method: continuing alternative working beween two towers 兩吸附筒交替連續工作
工作周期:Working periods: T=60-180min
控制方式:Control mode:micro-program controller 微機程序控制
安裝方式:Installation mode:indoor,non-basement 室內,無基礎安裝
常規吸附式干燥機的設計為:工作壓力7bar,進氣溫度:≤38℃,如果進氣壓力有變化,請用空壓機的排氣量÷下表的系數,得數為您需要選購的處理量。
其他入口壓力條件下的入口空氣流量 The inlet air flow under the others inlet pressure conditions(not including 7bar)
我們注重每一道制作工藝的自檢于總檢。
我們出口部多年服務于國外的挑剔客戶,10年的出口產品加工經驗促成滬盛高品質的生產工藝。
現在你可以以“出口的品質,親民的價格”買到您所以的后處理產品了!