產品介紹：本機是針對玻璃制品水晶鉆石底面磨平拋光的作用。

系統采用微電腦和高功率氣壓系統聯控設計，設備運行平穩，。使珠底磨制平面度平整，光潔且美觀。

雙工位機體，單獨控制，使用不受任何限制，翻轉速度可調，上升時間微度調節大大提高了工作效率，和整體產品的加工質量。上端氣缸設置定位調節，可直接手動調節高度，無需其他限位步驟，節省調試時間，旋轉磨盤速度設定可調式，可根據鉆石材料來設定旋轉速度，從而大大提高了磨制范圍。同時磨制時間也設定可調式，因此本產品不受任何材料的限制即可加工。

主機采用大功率電機，磨盤電機力度為自給式，更好的提高高了拋光效果。

系統設有特定保護，任何條件下不會燒毀主電機。

在2分鐘后如無人操作，主機自動停止，可避免空載耗電及其他不必要的損失。

聯動運行，普通工人無需培訓即可上崗，且可以操作多臺設備，大大減少了用工費用。

Introduction: This machine is the bottom for polished glass crystal diamond (rough grinding, fine grinding) role.

System uses a microcomputer and associated pneumatic control system design, equipment running smoothly and accurately. Flatness of the polished beads at the end flat, smooth and beautiful.

Double-body, single control, used without any restrictions, turning speed is adjustable, adjust the rise time of micro-level work has greatly enhanced the efficiency of processing and overall product quality. Top of the cylinder set position adjustment can be directly manually adjust the height limit without other steps, saving debugging time, rotating disc adjustable speed setting, according to set rotation speed of the diamond material, thereby greatly improving the grinding range. At the same time set the adjustable grinding time, so this product not subject to any material restrictions can be processed.

System has specific protection, will not burn under any conditions the main motor.

After 2 minutes if no operation, the host automatically stop to avoid no-load power consumption and other unnecessary losses.

Joint operation, the average worker can no training posts, and can operate multiple devices, greatly reducing labor costs.