溫嶺韓程泵業有限公司成立于1995年.本廠主要生產韓程PHC全自動冷熱水自吸泵、非自動冷熱水自吸泵、冷熱水循環管道泵、熱水自動增壓泵、全自動家用增壓泵等家用水泵，主要用于鍋爐、壁掛爐、蒸氣發生器、地暖循環設備等。

自吸泵的工作原理：
普通離心泵，若吸入液面在葉輪之下，啟動時應預先灌水，很不方便。為了在泵內存 水， 吸入管需要裝底閥，泵工作時，底閥造成很大的水力損失。所謂自吸泵，就是在啟動前不需灌水（安裝后次啟動仍然需灌水），經過短時間運轉，靠泵本身的作用，即可以把水吸上來，投入正常工作。自吸泵按作用原理分為以下幾類： 1.氣液混合式（包括內混式和外混式）； 2.水環輪式； 3.射流式（包括液體射流和氣體射流）。氣液混合式自吸泵的工作過程：由于自吸泵泵體的特殊結構，水泵停轉后，泵體內存有一定量的水，泵再次啟動后由于葉輪旋轉作用，吸入管路的空氣和水充分混合，并被排到氣水分離室，氣水分離室上部的氣體溢出，下部的水返回葉輪，重新和吸入管路的剩余空氣混合，直到把泵及吸入管內的氣體全部排出，完成自吸，并正常抽水。水環輪式自吸泵是將水環輪和水泵葉輪組合在一個殼體內，借助水環輪將氣體排出，實現自吸。當泵正常工作后，可通過閥截?cái)嗨h(huán)輪和水泵葉輪的通道，并且放掉水環輪內的液體。射流式自吸泵，由離心泵和射流泵（或噴射器）組合而成，依靠噴射裝置，在噴嘴處造成真空實現抽吸。

The working principle of self-suction pump:
Normal centrifugal pump impeller if inhaled liquid surface, start in advance, should be inconvenient. In order to water pump suction pipe, memory, import needs bottom valve pump working, bottom valve caused great losses. So-called self-suction pump, is in start without irrigation (before the first start after installation to infuse water), still for a short time after operation, the effect on pump itself, which can be put into water, the normal work. According to the principle of self-suction pump function can be divided into several categories: 1.the gas-liquid hybrid (including mixed type within and outside the mixed type), 2 water wheel, 3 jetting (including liquid jet and the gas jet). Gas-liquid hybrid self-suction pump working process: because of the pump suction pump stalled after the special structure, the pump body, being a certain amount of water pump impeller rotation due to start again, inhaled air and water pipe, and is fully mixing gas water separation chamber to water, air separation chamber of the upper spillover of water, gas, and the return of impeller residual air suction pipe, the pump suction pipe and until all the gas discharge, complete, and normal self-suction pump. Water wheel self-suction pump water ring round is in a combination of pump impeller and using water loop, wheel, gas discharge self-priming. When the pump is normal work, but through the valve and pump water loop truncate the channel impeller, and put off the liquid water ring round. Jetting self-suction pump, the centrifugal pump and jet pump injector (or on), spray nozzle, vacuum suction caused realization.

自吸泵應用范圍:
　　1、適用于城市環保、建筑、消防、化工、制藥、染料、印染、釀造、電力、電鍍、造紙、工礦沖洗、設備冷卻等。
　　2、裝上搖臂式噴頭、又可將水沖到空中后，散成細小雨滴進行噴霧，是農場、苗圃、果園、菜園的良好機具。
　　3、適用于清水、海水及帶有酸、堿度的化工介質液體和帶有一般糊狀的漿料（介質粘度