壓平機是一種主要用于對薄紙、皮革、灰板紙過膠水后壓平的專用設備。機本器傳動部位采用滾動軸承、鏈輪、鏈條和減速箱。上壓軸全包膠,下壓軸鍍硬鉻。本機器適用不同厚度的紙張壓平。因此使其外型精巧,性能穩定,傳動靈敏,噪音小,生產效率高勞動強度低等優點。
Flattening machine is a kind of special equipment mainly used for the tissue paper, leather, Grey Board had glue pressed. The transmission part of the roller bearings, sprocket, chain and gear box. On the all inclusive glue, under the hard chromium plating. This machine is suitable for different thickness of paper press.Therefore its sophisticated appearance, stable performance, sensitive transmission, low noise, high production efficiency and low labor intensity.
本機器由上下壓軸、上下機架、鏈輪組、鏈條、皮帶、皮帶輪、減速箱、電機、調節手輪等部件組成。
This machine is composed of upper and lower pressure, upper and lower frame,wheel group, chain, belt, pulley, gear box, the motor, the adjusting hand wheeland other parts.
本機由電機驅動,通過三角帶輪、三角皮帶、減速箱、鏈條、鏈輪組等,使上下壓軸轉動,調節壓力調節桿,使上下壓軸的間距改變,使上下壓軸的壓力符合使用要求。
This machine is driven by the motor, through the triangle belt wheel, a triangle belt, gear box, chain, sprocket group, the upper and lower shaft rotation, adjust the pressure regulating rod, the upper and lower the pitch change, so that the upper and the lower the pressure to meet the use requirements.
使用說明
Instructions for use
1. 使用機器前切記先加潤滑油,并使機器保持良好的潤滑狀態。
1. use the machine before you add the lubricating oil, and make the machine keepgood lubrication.
2. 切勿將硬物通過兩壓軸,以免損壞機件。
2. do not be a hard object through the two finale, to avoid mechanical damage.
3. 應經常注意保持機器清潔。
3. should always pay attention to keep the machine clean.
產品技術參數
Explanation of parameters
壓平機 | ||||
YP-720 | YP-1000 | YP-1200 | YP-1500 | |
工作寬度 | 720mm | 1000mm | 1200mm | 1500mm |
工作速度 | 35m/min | 35m/min | 35m/min | 35m/min |
電機功率 | 0.55kw | 0.75kw | 0.75kw | 1.1kw |
外形尺寸 | 920×700 ×1050mm | 1200×700 ×1050mm | 1400×700 ×1050mm | 1800×800 ×1050mm |
機械重量 | 160kg | 180kg | 210kg | 250kg |
工作電壓 | 380V
|