ategory 類 別 Trade mark 牌 號 Chemical composition 主要成份(%) Characteristics & application 特性和用途 Equivalent to AWS 相當(dāng)AWS Hardfacing 硬 面 堆 焊 S 101 C3 Cr28 Ni4 Si3.5 Fe Rem. HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump. HRc48-54，耐磨、耐氣蝕、抗氧化。堆焊鏟斗齒，泵套 　 S 111 C1 Cr29 W5 Co Rem. HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve. HRc38-47，高溫下耐磨、耐蝕。堆焊高溫高壓閥門 ECoCr-A S 112 C1.5 Cr29 W8 Co Rem. HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass. HRc45-50，高溫下耐磨、耐蝕。堆焊閥門，熱軋孔型 ECoCr-B S 113 C2.5 Cr30 W17 Co Rem. HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage. HRc≥55，高溫下耐磨、耐熱，但抗沖擊性差。堆焊螺旋送料機(jī)用 　 S 114 C2.5 Cr30 W12 Co Rem. HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit. HRc≥53，高溫下耐磨、耐熱，但抗沖擊較差。堆焊牙輪鉆頭 ECoCr-C Copper alloys 銅 　 合 　 金 S 201 Sn1 Si0.3Mn0.3 Cu Rem. Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. 機(jī)械性能好，抗裂性好。紫銅氣焊及氬弧焊用 ERCu S 211 Si3 Mn1 Cu Rem. Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel. 機(jī)械性能好，銅合金氬弧焊及鋼的MIG釬焊用 ERCuSi-Al S 212 Sn5 Cu Rem. Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用 ERCuSn-A S 213 Sn8 Cu Rem. Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用 ERCuSn-C S 214 Al7.5 Cu Rem. Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用 ERCuAl-A1