銷售韓國(guó)高麗K-63RT耐磨堆焊焊絲 K-329T E2209T1-1/4 - - K-329T is formulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless principal area of application is chemical plant and shipbuilding as well as nuclear plant industries. K-347T E347T1-1 YF347C YF347C K-347T is formulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels. K-409TiT EC409 - - K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode. K-410T E410T0-1/-4 YF 410C YF 410C K-410T is designed for MAG welding of martensite stainless alloys of the 13%Cr types. It is used for surfacing of sealing faces of valves for gas,water, and steam piping system at service temperatures up to 450∑ K-410NiMoT E410NiMoT0-4 - - K-410NiMoT is designed for MAG welding of soft-martensite stainless alloys of the 13%Cr-4%Ni-Mo types. K-430T E430T0-G YF430G YF430G K-430T is designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, K-436T - - - K-436T is designed for MAG welding of stainless steels of the 17%Cr-1% Mo-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, K-439T - - - K-439T is designed for MAG welding of stainless steels of the 18%Cr-1%Ti is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, K-309LF E309LT0 -1/-4 YF309LC YF309LC K-309LF is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steel. Dissimilar joint welds ; of and between high-strength, mild steels and lowalloyed QT-steels, stainless, ferritic Cr-and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings _disibledevent='center'> 汽車消聲器用金屬粉型16%Cr-Ti不銹鋼