品牌：斯米克 型號： 詳細說明 Copper alloys 銅 　 合 　 金 S 201 Sn1 Si0.3Mn0.3 Cu Rem. Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. 機械性能好，抗裂性好。紫銅氣焊及氬弧焊用 ERCu S 211 Si3 Mn1 Cu Rem. Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel. 機械性能好，銅合金氬弧焊及鋼的MIG釬焊用 ERCuSi-Al S 212 Sn5 Cu Rem. Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用 ERCuSn-A S 213 Sn8 Cu Rem. Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。銅合金氬弧焊及鋼的堆焊用 ERCuSn-C S 214 Al7.5 Cu Rem. Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用 ERCuAl-A1 S 215 Al9 Cu Rem. Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用 ERCuAl-A2 S 221 Cu60 Sn1 Si0.3 Zn Rem. Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵 　 S 221F Cu60 Sn1 Si 0.3 Zn Rem. S221 welding rod coated with flux. 外涂焊劑的S221焊絲 　 S 222 Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵 RBCuZn-C S 222F Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. S222 welding rod coated with flux. 外涂焊劑的S222焊絲 RBCuZn-C S 223 Cu59 Sn0.6 Zn Rem. Melting point is about 900℃. Braze welding of copper, steel and cast iron. 熔點約900℃。銅、鋼、鑄鐵釬焊用 RBCuZn-A S 224 Cu62 Si0.5 Zn Rem. Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵 　 Copper alloys 銅 合 金 S 225 Cu48 Ni10 Zn Rem. Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys. 熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用 RBCuZn-D S 225F Cu48 Ni10 Zn Rem. S225 welding rod coated with flux. 外涂焊劑的S225焊絲 RBCuZn-D S 226 Cu60 Sn0.3 Si0.2 Zn Rem. Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron. 熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵 　 S 227 Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem. Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵 RBCuZn-B S 229 Cu55 Ni6 Mn4 Zn余 Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide. 熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用