產品分類 更多>>
1. 一般特性 General Characteristics
1.1 額定值(Rating Value): DC30V/0.1A
1.2 工作溫度(Work Temperature Range): -10℃ ~ 70℃
1.3 存貯溫度(Store Temperature Range): -20℃ ~ 80℃
1.4 正常測試條件(未有特殊說明量測在以下條件進行):
General test condition (Tests and measurements shall be made under the following standard conditions unless otherwise specified):
正常溫度: 5℃~35℃ 相對濕度: 45%~85% RH 氣 壓: 8,600~10,600帕
Temperature: 5℃~35℃ Relative humidity: 45%~85% Air pressure: 8,600~10,600 pa
2. 產品外觀及尺寸要求 Appearance & Dimension Requirement
2.1產品外形結構緊湊,無配合不良.
The structure of product is compact, and assembly of parts has no badness.
2.2產品塑膠部件無嚴重縮水、披鋒、欠注、斑點、破損或變形現象.
The plastic parts of product have no serious defects such as very serious shrink, scarcity, fleck, disrepair, transmutation, etc.
2.3產品引腳和外殼無嚴重氧化、臟污、變形、毛刺或電鍍不良.
Lead feet and shell have no serious defects such as oxidation, smudge, disrepair, burr, defects on plating.
2.4開關操作順暢,節奏感強,無明顯卡塞現象。
Operating switch is unhindered, rhythmed , and there is not palpable clag.
2.5產品結構及尺寸參見產品規格圖紙。
Construction and dimensions：Refer to individual product drawing.
