浴室柜綜合壽命試驗機
一，百航牌本機概述
1﹑用途:本機適用于浴室柜抽屜滑軌，門鉸鏈壽命進行測試。
1、 Overview of baihang aircraft
Purpose: This machine is suitable for testing the service life of drawer slide rail and door hinge of bathroom cabinet
.2﹑原理:百航浴室柜測試機是模擬日常使用過程中的情況對拉門，抽屜進行反復開啟和關閉，循環一定次數后檢查鉸鏈，滑軌是否存在損壞或其他影響使用的情況。本機采用觸摸屏PLC程序控制，伺服電機驅動，可設置測試角度，測試次數，推拉行程和啟閉停頓時間，可用于帶緩沖型門鉸鏈和抽屜滑軌。2. Principle: baihang bathroom cabinet tester simulates the situation in daily use, repeatedly opens and closes the sliding door and drawer, and checks whether the hinge and slide rail are damaged or other conditions that affect the use after a certain number of cycles. The machine is controlled by touch screen PLC program and driven by servo motor. It can set test angle, test times, push-pull stroke and stop time. It can be used for door hinge with buffer and drawer slide.
3﹑依據標準:百航浴室柜測試機依據QB/T 2189，QB/T 2454,gb/t10357等標準要求制作3. Standards: baihang bathroom cabinet tester is made according to QB / T 2189, QB / T 2454, GB / t10357 and other standards
二、百航浴室柜測試機主要技術參數：
1.推拉啟閉采用伺服電機控制，750W8套，400W4套，
2.可設置次數0-99999999.
3.門打開角度角度30°~120°
4.抽屜推拉行程：100-600mm.
5..對于有緩沖功能的產品，可設置停頓時間，
6.測試工位：分兩組12工位。其中一組6工位，2工位測試抽屜，4工位測試門。
7.控制方式：觸摸屏PLC控制
8.測試速度1-20分鐘可調。
9.擺臂上下可調，推拉裝置上下可調。手動調節。
11.12工位單獨控制，可獨立工作。
12.電源380V,8KW.
2、 Main technical parameters of baihang bathroom cabinet tester:
1. The push-pull opening and closing are controlled by servo motor, with 8 sets of 750W and 4 sets of 400W,
2. The number of times can be set is 0-9999999
3. The opening angle of the door is 30 ~ 120 degrees
4. Drawer push-pull stroke: 100-600mm
5. For products with buffer function, pause time can be set,
6. Test station: 12 stations in two groups. One group of 6-position, 2-position test drawer, 4-position test door.
7. Control mode: touch screen PLC control
8. The test speed is adjustable from 1 to 20 minutes.
9. The swing arm can be adjusted up and down, and the push-pull device can be adjusted up and down. Manual adjustment.
11.12 working position is controlled independently and can work independently.
12. Power supply 380V, 8kw
