推車動態耐用性試驗機;嬰兒車動態路況測試機
推車動態耐用性試驗機依據EN標準, 模擬車子負重的情況下在路上跑,其測試方法是:將負載放在試車中,將試車固定于測試臺上,設定測試所需之時間和速度,試驗時間到達后,試驗機自動停機,目視車臺有無損壞。為改善動態耐用性之質量提供可靠之依據。采用微電腦PLC和液晶文本控制。可正反運行。
本機在設定時間到達后能自動停止操作,且裝有防止皮帶跑邊裝置
試車數量:一工位
承載負荷:200KG
*大測試速度:約5km/h,速度可調
推車固定把手:采用織布束環制作
導向滾輪及耐磨傳動皮帶;
信捷PLC +信捷液晶文本+易驅變頻器+
路況障礙物安裝方式制作,按要求
電源: AC220V 50Hz
尺寸約(L*W*H): 1800*1000*1600
Dynamic durability testing machine for stroller
According to en standard, the cart dynamic durability tester simulates the car running on the road under load. The test method is as follows: put the load in the test, fix the test on the test bench, set the time and speed required for the test, after the test time arrives, the tester stops automatically, and check whether the test bench is damaged. It provides a reliable basis for improving the quality of dynamic durability. It is controlled by microcomputer PLC and LCD text. It can run in both positive and negative directions.
The machine can stop operation automatically after the set time, and is equipped with a device to prevent the belt from running
Test run quantity: one station
Load: 200kg
Maximum test speed: About 5km / h, adjustable speed
Fixed handle of cart: made of weaving ring
Guide roller and wear-resistant drive belt;
Xinjie PLC + Xinjie LCD text + easy drive inverter+
The installation method of road obstacles shall be made according to the requirements
Power supply: AC220 V + 50 Hz
Size (L * w * h): 1800 * 1000 * 1600