BH-C2床墊彈簧試驗機

1、用于測試沙發及家具坐墊的彈簧框架及彈簧包和彈簧坐墊的耐久性和承受力。

2、可按預設定之壓力條件進行重復按壓測試，周期可預設定，到數自動停止。

3、本機專為沙發彈簧框架和彈簧包，海綿而設計的測試儀器，它可滿足以下三種測試要求

1） 耐久性測試可按預設定之壓力 條件進行 重復按壓測試，周期可預設定，到數自動停止。

2）壓縮量 程與壓力 關系檢測

3）按預設定行 程下壓，到位停止。在壓力 表上讀取該行 程的彈簧力， 在顯示屏上則顯示行 程值。

4）特定壓力 下彈簧壓縮量 檢測壓板下壓至設定壓力后停止，顯示屏上顯示該壓力值的壓縮行 程長度。

二、床墊彈簧試驗機技術參數：
1、本機壓力 = 100 公斤， 按壓行程150 mm。
2、壓力傳感器精度：0.3％ FS
3、行程精度 : ±0.2 mm
4、電源: 220 伏, 功率= 300 瓦

BH-C3床墊軟硬度測試儀

原理：床墊軟硬度測試儀適用于對彈簧床墊的軟硬度的測試，并可進行硬度等級的評定

二、床墊軟硬度測試儀主要功能：
1、用一塊底部凸出的球面， 圓形的剛性板進行加載，記錄加載曲線力值-位移進行分析數據，以評定床墊的硬度值及硬度等級。
2、本機臺采用鋁型材制作，外觀美觀大方。
5、全軟件操作，軟件界面清晰明了，操作方便。

Bh-c1 mattress impact durability testing machine;

Mattress is an important part of modern furniture. Mattress performance directly affects the quality of furniture. In order to test the performance of mattress, we need a mattress performance testing machine.

Mattress durability testing machine_ Mattress impact testing machine_ Mattress mechanical property testing machine is used to test the bearing capacity of various soft furniture and spring mattress to long-term repetitive load. Brown mattress and soft foam polymer mattress must be combined with reference to relevant standards. Mattress durability testing machine is not suitable for testing water filled mattress and inflatable mattress.

Cornell mattress tester

1、 Main functions of Cornell mattress test:

Test Objective: repeatedly impact the mattress with specific loading block to evaluate its durability and spring retention

2、 Main technical parameters of mattress impact durability tester:

1) The pressure applied on the mattress is displayed on the LCD screen, and the pressure range is 300kg

2) Adjust the stroke of push rod so that the maximum force acting on the mattress is 1025n and the minimum force is 22n

3) The stroke speed of the push rod is adjustable, about 100 cycles per minute

4) The maximum size of mattress is 2.2 m x 2 m

8) Configuration: test device, one indentation test head, one 200kg force sensor

Design standard: ASTM f1566-2009 Item 9