BH-150滑板車動態耐用性試驗機
一、產品說明：本試驗依據 BS EN14619，CNS6263-11設計制造,其目的是模擬滑板車，溜冰鞋路況運動時底輪及車體之動態耐用之程度(亦可用來作其它類產品之試驗),為改善動態耐用性之質量提供可靠之依據。本試驗機采用觸摸屏PLC程序控制，可設置顯示行駛的距離，行駛的速度。帶微型打印機打印測試數據；操作簡單方便。采用雙滾筒，輪子中心距可調。
二、產品規格:
1.滾筒直徑: Ф700, 長度500mm，
2.滾筒個數：2個
2.沖擊塊個數: **個/1.5S
3.行駛速度1-3kmM/小時可任意設置，（測試速度0.5米/秒）
4.行駛距離1-999999KM可設置
5.電機功率: 5p
6.適用滑板車尺寸規格：輪距550mm---1000mm
7. 障礙物：鋼制，梯形狀，尺寸依標準
8.載荷：20~100kg可調
9. 測試時間：1min~999h 可設置
10 測試裝夾空間：1000×300×1200mm。根據具體產品定
11.微型打印機，打印測試數據；
12.重量：約500kg
13電源: AC380V 50HZ
This part of GB / T 18029 specifies the structure of test dummy with nominal mass of 25kg, 50kg, 75kg and 100kg used in other parts of GB / T 18029. The design principle of the test dummy is to place it on the corresponding wheelchair. Under the test condition, the position of its center of gravity is roughly the same as that of a person with the same mass sitting in a wheelchair. Special test dummy for wheelchair
Baihang brand GB / T 18029 wheelchair dummy, test dummy device
It is designed and manufactured according to GB / T 18029.1-2008 (ISO 7176-1:1999).
Part 29: Determination of static stability of wheelchairs
Baihang brand GB / T 18029 wheelchair dummy, test dummy device
Special test dummy for wheelchair
It is designed and manufactured according to GB / T 18029.1-2008 (ISO 7176-1:1999).
