產(chǎn)品分類 更多>>
產(chǎn)品詳細(xì)說(shuō)明:MKDD/S
The spray valves of series MKDD – S are designed for the application of glues and adhesives.
Depending on air cap this spray valve sprays in flat- or roundspray. Depending on viscosity of fluid, the
application can be adjusted individually via nozzle dimension, atomizing air pressure and material
pressure. The supply of atomizing air, control air and material should be done via three hoses. Spray
valves are precision tools. Always keep clean and observe minimum instructions to maintain a long
usefull life of the valve.
Measurements:
with air cap flatspray = 130mm x 22mm x 80mm
with air cap roundspray = 127mm x 22mm x 80mm
Weight = approx. 510g
Control air pressure = 5 – 6 bar
Atomizing air pressure = as required, but at least 0,5 bar less then control air pressure
Material Pressure = max. 35 bar
Available dimensions: 0,2 / 0,3 / 0,5 / 0,8 / 1,0 / 1,2 / 1,5 / 2,0 and 2,5mm
