太陽能輔熱管道加熱

主要結構及工作原理

The main structure and working principle

管道電加熱器結構electric heater pipe structure

管道電加熱器是由多支管狀電加熱元件、筒體、導流板等幾部分組成，管狀電熱元件是在金屬管內放入高溫電阻絲，在空隙部分緊密地填入具有良好絕緣性和導熱性能的結晶氧化鎂粉，采用管狀電熱元件做發熱體，具有結構先進，熱效率高，機械強度好，耐腐、耐磨等特點。筒體內安裝了導流隔板，能使介質在流通時受熱均勻。

Tube electric heater is made up of highly branched tubular electric heating element, barrel, guide plate of several parts, such as tubular electric heating element is in the metal tube in the heat resistance wire, the void part closely to fill in the crystallization have good insulation and thermal conductivity of magnesium oxide powder, tubular electric heating element is applied to make heating element, has the advanced structure, high thermal efficiency, good mechanical strength, corrosion resistance, abrasion resistance and other characteristics. Cylinder body installed diversion clapboard, can make the medium in circulation when heated evenly.

    安裝The installation

控制柜應安裝在干燥通風，便于操作的地方。管道電加熱器外殼、控制柜外殼應可靠接地，管道電加熱器應水平安裝，底座螺母要擰緊使其穩固。

本體與外接管道安裝時，應注意進出口方向。管道電加熱器在使用前應測量電源接入端子與金屬外殼絕緣電阻不得低于2MΩ，使用環境相對濕度不大于85%。電源線的出、入端應牢固可靠，不得松動。

Control cabinet shall be installed in a dry and ventilated, easy to operation. Electric heater pipe shell, control cabinet shell should be reliable grounding, tube electric heater should be installed, base nut to tighten the firm.

Ontology and the external pipe installation, should pay attention to the direction of the import and export.Electric heater pipe before use should be measured power access terminal and metal exterior insulation resistance shall be not less than 2 m 惟, use environment relative humidity is not more than 85%. The power cord, into the end should be solid and reliable, and shall not be loose.

品質源于管理，服務源自真誠，我們愿與您精誠合作，攜手共創輝煌。隨時恭候您的詢價、謝謝。

我們的品質和保障值得您信賴！歡迎您來電咨詢，來本廠參觀指導！