特性：主要用于電鍍表面、強化表面、真空電鍍表面．PU表面．UV表面等材料上，具有高色澤、高色彩、高遮蓋力、高穩定性、耐酒精及耐磨擦之特點。印刷：絲印移印均可。表干及實干時間：表干時間自然揮發5-10分鐘；實干時間在24小時以內。稀釋及清洗：SV3慢干開油水、UVK1（移印開油水）同時可使用718洗網水清洗。測試方法（完全干燥后）：1、3m膠紙粘在畫有百格的油墨表面，45度角迅速拉起不脫油;2、度99%的工業酒精，一千克砝碼用棉布包住在油墨表面，以水平力來回拉200次無脫色;3、耐磨：橡皮擦500g力水平來回擦500次。 使用方法：1、使用前應充分?jǐn)嚢瑁煤箅S時封閉；2、攪拌時加開油水10-15%，稀釋到印刷粘度； 3、網板塞網時可用洗網水清洗；4、不得與其它類型油墨混合使用。注意事項：1、塑膠材料的外觀相似，但可能會是不同的材料，客戶需試印確定其符合要求后，再批量印刷；2、在移印過程中，如出現拉絲或散開，可適當加入一些慢干膏即可;3、環境溫度過高，將會影響油墨原有質量；4、根據氣候變化，請遠離火源，陰暗環境下存放。 Oles MPE Plating Ink MPE plating strengthening series ink characteristics : mainlyusedin plating surface, enhanced surface, vacuum plating surfaceandother materials, with a high color, high color, highcoveringpower, high stability, high alcohol and rubcharacteristics.Printing: screen printing can be. Surface dryingand drying time:surface dry time natural volatile 5-10 minutes;work time within 24hours. Dilution and cleaning: SV3 slow dry openwater, UVK1 (printing open water) can be simultaneously used 718washing networkwater cleaning. Test method ( completely dry ): 1,3M gummed paperin the paintings of the surface of the ink, 45degree angle quicklypulled off the oil; 2, 99% of the purity ofindustrial alcohol, onekilogram of weight of cotton pack in the inksurface, with ahorizontal force pulling back and forth 200 timeswithoutdecolorization; 3: oak, wear resistance eraser 500g forcelevelbrush back and forth 500 times. Usage: 1, use should befullystirred, use at any time after the closure; 2, add watermixing10-15%, diluted to 3, screen printing viscosity; the plugisavailable when washing network water cleaning; 4, not withothertypes of ink mixing. Note: 1, the plastic material similarinappearance, but may be of different materials, customers needtotry to determine its requirements, and then batch printing; 2,inthe printing process, such as drawing or spread out, maybeappropriate to add some slow dry plaster; 3, theambienttemperature is too high, will affect the quality of theoriginalink; 4, according to climate change, please stay away fromfire,dark environment storage.